COF Incline Friction Tester

Product Introduction

The Coefficient of Friction Incline Friction Tester measures Slide Angle Friction of a sample sheet substrate such as paper, corrugated, corrugated, plastic film, or paperboard which determines the angle of inclination at which one sample affixed to a sled will begin to slide/slip against another substrate of a similar material. Slip and Friction testing aids in the evaluation of chemicals and additives used to create and minimize the degree of friction between two contacting test specimens.

During a test, an inclined plane is increased at a rate of 1.5 +/- .05 per second by a vibration isolated electric motor until the test block begins to slide. The initial movement of the sled is the Slide Angle or Coefficient of Static Friction of the material. When the test block just begins to slide a sensor automatically stops increasing the inclined plane and returns it to the start position at high speed. The test results remain on the screen until the next test is run.

A variety of factors can affect the Slide Angle measurements including abrasion, coatings, printing, varnishes and most importantly, humidity.
 
 
Applications: 
Paper
Flexible Packaging
Foils
Rubber
Plastics
Wood
Linoleum
Metal
Printing
Coatings
Composites
 
 
Features: 
Digital Display, 0.1 degree resolution
Motor-driven elevation
Vibration isolation
Simple, one button measurement of static COF
Precision Resolver automatically captures the angle of the sled movement
Measures only slide angle or coefficient of static friction
Determines static and dynamic coefficient of friction of sheet materials
Direct drive arm with unique skid control
Easily interchangeable sleds
Easy and reliable operation
Includes calibration certificate
Shock absorbing drive mechanism for long life
Rapid platen return speeds testing
RS232 DATA LOGGING over a USB or legacy connection (via add-on module) integrates with data logging software
 
 
Specifications: 
0 to 80 degree angle
Meets Tappi 815, 503, 548 and ASTM D 202 and has optional RS 232 output
Electrical: Universal Power Supply
Volts: 85-264VAC
Hz: 47-440Hz
Watts: 10W TYP, 2W SLEEP, 20W MAX
Cord: USA 120 3-prong. Cords are available for all countries (for consumer grade sockets). Please specify your power cord requirements.
 
 
Sliding Blocks (at least one is required):
T 815 (for paperboard/corrugated/liner) 3.5 in x 4 in, 1300 g (Item # 06-10-10) POPULAR!
T 503 (for shipping sacks) 3.5 in x 4 in, 1260 g
(Item # 06-10-11)
T 815 (for fiberboard) 2 in x 4 in, 750 g
(Item # 06-10-12)
D 202 (for electrical insulation paper) 2.5 in x 3 in, 235 g
(Item # 06-10-13)
T 548 (for printed paper) 2.5 in x 2.5 in, 200 g
(Item # 06-10-14)
1.5 in x 3.5 in (for COF) 500 g
(Item # 06-10-15)
Custom sliding blocks available upon request

Related Products